The industrial chiller is widely used in plastic, electronic manufacturing, electroplating, pharmaceutical and chemical industry, ultrasonic cooling, printing and other industrial production.
The industrial chiller can control the temperature accurately by modern industrial mechanization production, thus greatly improving the production efficiency and product quality.
The industrial chiller is easy-operation, reasonable design and superior quality. It has hundreds of specifications and is an indispensable companion for modern industrial production.
Model:WENLIN-3P/5P industrial chiller
Cooling capacity:7800kcal/h 9.07KW
Output power:3.27KW
Power supply:3PH-380V/50HZ
Refrigerant:R22
Control method:capillary tube
Compressor Type:fully enclosed vortex type (piston type)
Power: 2.67KW
refrigerant type: high efficiency copper tube sleeve aluminum fin type + low noise external rotor fan
Cooling air volume:3000m3/h
evaporator type: tank coil
Frozen water volume:1.55m3/h
Water tank: 50L
Inlet and outlet pipe diameter:1″
Pump power: 0.37KW
Lift range: 20M
Protection: compressor overheat / overcurrent /high and low pressure /over temperature/phase sequence/lack of phase/exhaust overheat protection
Weight:120KG
Dimension:L930mm*W560mm*H970mm
Remark:
1.The cooling capacity basis: cooling inlet and outlet water temperature 12℃/7℃, cooling inlet and outlet air temperature 30℃/38℃.
2.Working range: Cooling water temperature range: 5℃ to 35℃; Temperature difference between inlet and outlet of chilled water: 3℃ to 8℃, and the condensing temperature should not be higher than 35℃.
3.Reserve the right to change the above parameters or dimensions without prior notice.