The industrial chiller is widely used in plastic, electronic manufacturing, electroplating, pharmaceutical and chemical industry, ultrasonic cooling, printing and other industrial production.
The industrial chiller can control the temperature accurately by modern industrial mechanization production, thus greatly improving the production efficiency and product quality.
The industrial chiller is easy-operation, reasonable design and superior quality. It has hundreds of specifications and is an indispensable companion for modern industrial production.
Mode: WL-CA-08(D) industrial Chiller
Cooling Capacity:17630kcal/h, 20.5kw
Total Input Power: 8.29kw
Power Supply Voltage: 3PH-380V/50Hz
Compressor Type: Hermetic scroll type
Compressor Power: 3.31*2kw
Condenser Type: High efficient finned copper tube+ low noise outer rotor fan
Condenser Cooling Air volume: 8000㎡/h
Evaporator Type: Water tank with coil
Evaporator Chilled fluid flow: 3.52㎡/h
Evaporator Tank volume: 120 L
Evaporator Inlet/outlet pipe caliber: 1-1/2″
Water Pump Power: 0.75kw
Pump Head: 20m
Safety Protection: Compressor overheating , over current, high and low pressure, over temperature , flow switch, phase sequence, phase-missing,
exhaust overheating, anti-freezing.
Weight: 310kg
Dimension: 1250*720*1390mm
Note:1. nominal cooling capacity calculated according to: Inlet/outlet chilled fluid
temperature : 12℃/7℃. Inlet/outlet cooling air temperature: 30℃/35℃.
2. Working condition: The temperature range of chilled fluid is from 5℃ to 35℃.
Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃.
It is better to run the chiller while the ambient temperature at or below 35℃.
3. We reserve the right to modify the above information without further notice.